How To Install Veritas Volume Manager In Linux

How to Install VERITAS Book Managing director Software

Perform this process to install VERITAS Volume Director (VxVM) software on each node that you want to install with VxVM. You tin can install VxVM on all nodes of the cluster, or install VxVM only on the nodes that are physically connected to the storage devices that VxVM will manage.

Earlier You lot Brainstorm

Perform the following tasks:

• Ensure that all nodes in the cluster are running in cluster mode.

• Obtain any VERITAS Volume Managing director (VxVM) license keys that you need to install.

• Have bachelor your VxVM installation documentation.

1. Get superuser on a cluster node that yous intend to install with VxVM.

2. Insert the VxVM CD-ROM in the CD-ROM drive on the node.

3. Follow procedures in your VxVM installation guide to install and configure VxVM software and licenses.

4. Run the clvxvm utility in noninteractive way.

   
   

   phys-schost#                                  clvxvm initialize                              

   The clvxvm utility performs necessary postinstallation tasks. The clvxvm utility also selects and configures a cluster-wide vxio commuter major number. See the clvxvm(1CL) homo page for more information.

5. SPARC: To enable the VxVM cluster feature, supply the cluster feature license primal, if yous did not already do so.

   See your VxVM documentation for information about how to add a license.

6. (Optional) Install the VxVM GUI.

   See your VxVM documentation for information about installing the VxVM GUI.

7. Eject the CD-ROM.

8. Install any VxVM patches to support Sun Cluster software.

   Meet Patches and Required Firmware Levels in Sunday Cluster iii.2 Release Notes for Solaris OS for the location of patches and installation instructions.

9. Echo Stride 1 through Footstep 8 to install VxVM on any additional nodes.

   ---

   Notation –

   SPARC: To enable the VxVM cluster feature, you must install VxVM on all nodes of the cluster.

   ---

10. If you do not install one or more nodes with VxVM, modify the /etc/name_to_major file on each non-VxVM node.

    1. On a node that is installed with VxVM, determine the vxio major number setting.

       
       

       phys-schost#                                          grep vxio /etc/name_to_major                                      

    2. Become superuser on a node that you exercise not intend to install with VxVM.

    3. Edit the /etc/name_to_major file and add an entry to gear up the vxio major number to NNN, the number derived in Stride a.

       
       

       phys-schost#                                          half dozen /etc/name_to_major                                        vxio                    NNN                  

    4. Initialize the vxio entry.

       
       

       phys-schost#                                          drvconfig -b -i vxio -m                                        NNN                  

    5. Repeat Footstep a through Stride d on all other nodes that you do not intend to install with VxVM.

       When you lot stop, each node of the cluster should have the same vxio entry in its /etc/name_to_major file.

11. To create a root deejay group, go to SPARC: How to Encapsulate the Root Disk or How to Create a Root Deejay Group on a Nonroot Disk.

    Otherwise, go on to Step 12.

    ---

    Note –

    A root disk grouping is optional.

    ---

12. Reboot each node on which you installed VxVM.

    
    

    phys-schost#                                  shutdown -g0 -y -i6                              

Next Steps

To create a root deejay group, go to SPARC: How to Encapsulate the Root Disk or How to Create a Root Disk Grouping on a Nonroot Disk.

Otherwise, create disk groups. Go to Creating Disk Groups in a Cluster.

Source: https://docs.oracle.com/cd/E19787-01/819-2970/cacgbhjg/index.html

Posted by: codycoved1936.blogspot.com

Share this post